KSA's Part & Art Development Thread

Thought it would be a good idea to start a thread containing all the in-progress progression and WIP content I post to Discord. As the forums are a little more grounded and persistent compared to an endless scrolling list of short-form content; it might make for a better place to discuss ideas and the development of the game's parts, art style, scope etc as it happens. When things are resolved enough I'll post em as their own threads as usual :)

I'll kick things off with the first look of our initial docking port part - an androgynous system designed to be both passive and active inspired by the APAS75 port created collaboratively by the Soviet Union and the USA. This was to help facilitate docking between a Soyuz and an Apollo CSM, and represented one of the first instances of a universal design that the Cold-warring nations worked together on. It sits a bit ahead on the timeline of the OG Apollo docking parts (as they were probe and drogue systems) but is probably more appropriate for straightforward craft-to-craft attachment this early in dev. We might branch backwards to more complicated passive\active systems as time goes on.

apas75_01.png

apas75_02.png
apas75_03.png
 
I think 2027 is going to be the year when we see a huge explosion of new parts and gameplay features. I’m actually pretty curious about what Nertea has been working on. I’ve seen him in the Discord channels, and he’s also one of the developers, but he seems to be very mysterious. Hopefully he and Daishi can bring us all kinds of miracles.
As I understand it, Nertea hasn’t been actively working on anything KSA. I think it may be a sort of contract situation? Last blurb from Nertea on Discord talked about doing systems engineering and software architecture for actual satellite constellations.
 
As I understand it, Nertea hasn’t been actively working on anything KSA. I think it may be a sort of contract situation? Last blurb from Nertea on Discord talked about doing systems engineering and software architecture for actual satellite constellations.
So some of the developers aren’t actually full-time, right? I thought all the developers were working on the game full-time, and that Nertea was just keeping a low profile, since I haven’t seen any commits from him in the changelogs. I only just realized that he hasn’t been actively involved yet, or rather, that he hasn’t actually started working on the game yet.
 
I’m actually pretty curious about what Nertea has been working on.
I'd temper expectations from Nertea. While they have been listed as a designer dev on Discord there has been no elaboration I've seen from anyone on the team about their role or contributions. Additionally, they've only posted 4 messages to the Discord all-time, half of which are about how their actual non-KSA day job has caused them to stop KSP modding. KSA doesn't seem to be keeping any secrets, the dev team is very public about their progress and add content to the game as it is made. I'd say it's less mysterious than you might be expecting, seems he simply is not a contributor right now.
 
Structural stuff, things are probably missing from the "core" KSP set but they can always come later :)

New fabric workflow (thx again for all the help getting my head around blonder, @Beale), foil workflow (gawd i hate mylar), and hopefully a variant switching system to come out of it 🐱
 
Begs the question of the trusses being partially ✨procedural✨ at some point in the future
As in not fully, but incremental size variants (1x length, 2x, 4x, 8x).
Simple reason, decluttering the part selection window. Fuel tank list is long enough already and we're not done yet I don't think.
 
If not the procedural route, we are looking into a way to group and collect similar variations of parts into a toggle in the VAB eventually. If we don't there's gonna be a *ton* of clutter once i'm done with everything I want to make :P

1792834862471.png

Smol radial decoupler, and a tidy up of the existing one. Perfectly sized for lander cans and small probes 🛰️

1792835191542.png
 
Finally got around to reworking the legacy hatch and transforming it into the EVA hatch - something we'll def need for kittens to disembark from the lander can. Took the single sided model, added the rear locking mechanism and back face from the docking port hatch, and spruced up the gasket cover with some more cloth sim insulation.

1792983299091.png

1792983959893.png
 
If not the procedural route, we are looking into a way to group and collect similar variations of parts into a toggle in the VAB eventually. If we don't there's gonna be a *ton* of clutter once i'm done with everything I want to make :P
Some sort of grouping system, whether submenus, dropdowns, or something else (or combination thereof), along with really strong readability for part differentiation, would be incredible. One of the places I would get bogged down in KSP is, when making bigger vessels, repeatedly hunting through menus to find that one specific part I needed, over and over. This was, admittedly, great exacerbated by the fact that I love having lots of parts (another reason why it's always awesome when we see the next batch of parts that's cooking), so I had way more than stock, from mods, some of which would put everything in their own tab, and some that were just mixed in with everything else; in turn, some of those at least had clear enough visual differences, but some looked similar enough to make it incredibly tedious to actually find any one specific thing. Definitely the more parts you get, the more important a clear, easy, and quick part selection UI becomes, especially once you clear a certain critical mass for quantity.

Actually, along those lines, pardon me if this already exists, I'm not fully up to to date on what the construction UI is like right now, but, if there isn't one, a 'recent parts' tab, could be incredibly useful: there are plenty of times I can remember repeatedly adding a bunch of small parts, but the design meant switching up which one at any given moment, and repeatedly going through menus to find them gets really tedious (sometimes you can just copy the parts as you go, but there are also plenty of situations where that doesn't really work). Having a menu that just had all of them right there for you would be extremely useful.
 
I was travelling when the trusses were posted. These are great!

I have two requests for trusses:
1. Trusses should be "fillable". I want to be able to put things inside these trusses without needing to attach those things to the side and then clip them into the inside of the truss. When parts are "inside" the trusses, I want to be able to interact with those parts without requiring some kind of super camera zoom trickery.
2. Some trusses, like these, appear to be traversable in IVA. I want to be able to put an IVA traversable part "inside" the truss, and travel from the outside part to the inside part while in IVA.
1794265914987.png
 
Trusses should be "fillable". I want to be able to put things inside these trusses without needing to attach those things to the side and then clip them into the inside of the truss.
As I understand it this the plan and also somewhat already implemented. End cap parts like what you're shown are intended for housing engines. Then you could also build around them.

1794267905257.png

You can't quite see it here but that's what I did on this little lander. I also built a shell of bare panels which house the tanks and have the legs mounted to.

I'm also looking forward to the expanded functionality. Maybe fitting tanks into trusses? Or just cramming whatever I want in there.
 
Heatshields! Taking cues from the Restock approach (clean, inline fairing profiles; supporting truss hardware that references real flight hardware, and multi-profile rings for attaching smaller parts that aren't capsules).

Currently 2m, 2.5m, 3m. The 4m diameter will have to wait (filled up the atlas) but is sized perfectly to its Apollo analogue, so pretty pleased with that. Each comes with two colour variants (prob white and black?).

1794741320381.png

1794741704535.png

1794741205310.png
 
Heatshields! Taking cues from the Restock approach (clean, inline fairing profiles; supporting truss hardware that references real flight hardware, and multi-profile rings for attaching smaller parts that aren't capsules).

Currently 2m, 2.5m, 3m. The 4m diameter will have to wait (filled up the atlas) but is sized perfectly to its Apollo analogue, so pretty pleased with that. Each comes with two colour variants (prob white and black?).

View attachment 2495

View attachment 2496

View attachment 2494
We finally have the heat shield! Looking forward to the art and physics effects when entering the atmosphere.
 
Back
Top